Rotary Vibrating Screen maintenance guide

Rotary Vibrating Screen Maintenance guide

Rotary vibrating screen is an efficient powder sieving equipment apply for large and fine powder separating and filtering apply with low noise and high efficiency. Mainly suitable for various industres related to people's liveliood such as food, medicine, fine chemical industy, etc. Right maintenance for the vibrating screen is really important and necessary for customers.

In order to ensure the use effect and service life of the rotary vibrating screen, the equipment must be cleaned after each screening operation. and after working for several months, Your should pay attention to the working conditions of the vibrating screen and do the right Maintenance processing ensure the vibrating screen machine best working conditions.

Rotary vibrating screen maintenance guide brief show:

1. Refuel regularly when the vibrating screen is continue running, and refuel twice a week. (No. 3 lithium base grease lubricating oil) The vibration motor should check and clean the oil seal and bearings after running for 1500 hours. If there is serious damage, it should be replaced immediately.

2. A minor repair and maintenance should be carried out every three months(especially continue working for a long time), and a major repair should be carried out every 6-12 months. During the inspection, check whether the fasteners are damaged or loose.You should also pay attention to the fasterers everyday for loose.

3. Check the cables regularly (change the motor leads every 2-3 months).

4. Check the seal and the screen mesh, ensure there is no powder flying and damage of the screen mesh. Change the screen mesh and seal by our engineer suggest time.

The right operating of the rotary vibrating screens and maintenance can effectively prolong the service life of the equipment! If you have some other questions, welcome contact us and we will contact you soon!