Ultrasonic vibrating screen operating process

Ultrasonic vibrating screen operating process

The right operating process for the ultrasonic vibrating screen machine is really imporatant and necessary. this can ensure the ultrasonic vibrating screen working more efficient and longer sieving lifetime. The following info is about the ultrasonic vibrating screen right operating process show:

1. Turn on the ultrasonic vibrating screen generator, turn on the intensity to full, and run for 2-3 minutes.

2. Attention for the working condition ensure no special noise and working condition well.

3. Start the ultrasonic vibrating screen vibration motor, and after the vibrating screen runs smoothly, adding materials to the silo.

4. Open the manual butterfly valve of the silo to ensure conveying smooth and smooth feeding. Feeding speed reference by your selecting type and autural sieving results.

5. Turn on the vibrating device of the silo to ensure continuous and smooth feeding.

6. Observe the feeding status of each powder accumulation bucket, and timely turn over the materials in the powder accumulation bucket to prevent overflow of full material.

7. Check the silo frequently to prevent the feeding port from being blocked.

8. After the raw materials are screened, samples are taken and sent in time, and the product particle size is guaranteed according to the process requirements.

9. After the products are qualified, they should be packaged and put into storage in time.

Ultrasonic vibrating screen Factory

Your should really pay attention for the ultrasonic vibrating screen deblinding working condition. ensure the most suitable ultrasonic devices adjustment for your materials sieving requirements.